SEW UNIQUELY
GC06910-MD3 Direct Drive, Inbuilt Control Panel, Auto Thread Trim, Auto Foot Lift, and Micro Lube Sealed Oil Sump.
All for $1,750.00 Plus GST.
New Enclosed
Micro Lube Sealed Sump.
For over 50 years Japanese machines have been
lubricated from an open oil sump, that is, the
machine sat on top of the oil sump, but it was
not sealed.
This lubricated the machine very efficiently,
Increasing top speeds with less noise,
increasing
the overall life
of the
machine.
This was fine when
the occasional oil stain was not a huge problem,
but for dressmakers, and particularly wedding
dresses the occasional oil stain was a disaster.
Now with the enclosed gear box, there is no oil
to get out.
In Melbourne and surrounding areas
IF YOU ARE ABLE TO PICKUP FROM OUR MELBOURNE BUSINESS IN
RINGWOOD THEN YOU CAN SAVE
$110.00 OF THE GST INCLUSIVE PRICE.
SAVE AN ADDITIONAL $110.00
IF YOU ASSEMBLE THE TABLE AND FIT THE MACHINE, FULL
INSTRUCTIONS PROVIDED.
$AVE A TOTAL OF $220.00
OF THE GST INCLUSIVE PRICE.
In Sydney, Gold Coast, Adelaide,
Brisbane, Perth.
price includes delivery by local
mechanic, set up, with 12 months on
site warranty parts and labour.
Freight by TNT could apply from Melbourne to your area.
IN ALL CASES THE MACHINE IS CHECKED AND STITCHED OFF.
ALL OTHER AREAS NOT LISTED ABOVE GET A $110.00 DISCOUNT
TOWARDS THE FREIGHT.
Above Typical GC6910-MD3 Fully Automatic.
Automatic Thread Trim, With Full Featured Control Panel.
Automatic Foot Lift.
Micro Lube Sealed Oil Sump.
Led light, dimmable to suit operator needs.
Builtin Bobbin Winder.
Thread Nipper for Clean Stitch at Start.
NEW Simple to use control
panel,
touch
pad control.
GC6910-MD3 $1,750.00 +
GST.
All prices are a guide only and subject to change without
notice.
SEAMS UNIQUELY
Adjustable 2 X led
Lights.
Thread
Nipper.
Back Tack Switch.
5mm
Stitch Length Set From Touch Pad
Built in
bobbin winder.
Built-in Auto Foot Lift.
Adjust
brightness to suit.
No more birds
nest at the start.
Easy back
tack within reach.
Stitch
stays where you set it.
On top of
the machine where it can
be seen. With handy knife to trim
bobbin thread.
Foot can be set to lift on heel back,
and auto on finish
No Hidden Costs
Model
Work Type
Stitch
Stitch
Length
Bobbin
Feeding
RPM
Foot
Lift
Work
Area
Bed Dimensions
Needle
Built
in lightMade In
GC6910-MD3
Light-Medium
Lockstitch
0-5 mm
Standard.
Electronic
5000
6/13 mm Knee Press
295 mm X 140mm
520X180cm
16X231 DBX1
2XLed.
China
Program
Automatic
Model
Thread Trim
Back Tack
1 to 4 Start/Finish
Slow Start
Set Stitch Length from Touch Pad
Max. Tack
Stitches
Turn on/off
Trim
4 Bar Tack
Reverse
Switch
Change Needle
Stop
up/Down
GC6910-MD3
| Motor | Type | Output Power | Amps | RPM | Made In |
| Typical | Direct Drive Servo, Synchroniser, and top Speed adjustment. |
550 Watts 0.6 HP |
0.3 | Top Speed Adjustable | China |