GC06730-MD3 Direct Drive, Auto Thread Trim, and Micro Lube Sealed Oil Sump.
All for $1,100.00 Plus GST. One Only at This Price. New but Shop Soiled.
All other areas a $100.00 discount
towards freight.
New Enclosed
Micro Lube Sealed Sump.
For over 50 years Japanese machines have been
lubricated from an open oil sump, that is, the
machine sat on top of the oil sump, but it was
not sealed.
This lubricated the machine very efficiently,
Increasing top speeds with less noise,
increasing
the overall life
of the
machine.
This was fine when
the occasional oil stain was not a huge problem,
but for dressmakers, and particularly wedding
dresses the occasional oil stain was a disaster.
Now with the enclosed gear box, there is no oil
to get out.
Above Typical GC6730-MD3 Fully Automatic.
This Machine as Become Shop Soiled and as Been Reduced From
$2,000.00 to $1,100.00 Plus GST.
Automatic Thread Trim, With Full Featured Control Panel and
Display.
Automatic Foot Lift, Option.
Micro Lube Sealed Oil Sump.
Electronics by Ho Hsing.
Set Stitch Length Lock.
Complete With
Led light.
Built-in Bobbin Winder.
(Melbourne Metropolitan Area)
Model
Work Type
Stitch
Stitch
Length
Bobbin
Feeding
RPM
Foot
Lift
Work
Area
Bed Dimensions
Needle
Led light
Made In
GC6730-MD3
Light-Medium
Lockstitch
0-5 mm
Standard.
Drop Feed
4000
6/13 mm Knee Press
295 mm X 140mm
520X180cm
16X231 DBX1
Magnetic
China
| Motor | Type | Output Power | Amps | RPM | Made In |
| Ho Hsing | Direct Drive Servo, Synchroniser, and top Speed adjustment. |
550 Watts 0.6 HP |
0.3 | Top Speed Adjustable | China |