GC06920-MD3 Direct Drive, Inbuilt Control Panel, Auto Thread Trim, Auto Foot Lift, and Micro Lube Sealed Oil Sump.
All for $2,200.00 Plus GST.
New Enclosed
Micro Lube Sealed Sump.
For over 50 years Japanese machines have been
lubricated from an open oil sump, that is, the
machine sat on top of the oil sump, but it was
not sealed.
This lubricated the machine very efficiently,
Increasing top speeds with less noise,
increasing
the overall life
of the
machine.
This was fine when
the occasional oil stain was not a huge problem,
but for dressmakers, and particularly wedding
dresses the occasional oil stain was a disaster.
Now with the enclosed gear box, there is no oil
to get out.
No Hidden Costs In Melbourne and surrounding areas
Price includes delivery, set up, with 12 months
on-site warranty parts and labour. If you are able to pickup from our Melbourne
office in Ringwood then you can
SAVE $110.00
of the GST inclusive price. SAVE an additional
$110.00 If you assemble the table and fit
the machine, full instructions provided. $AVE A TOTAL OF
$220.00 Of the GST inclusive price. In Sydney, Gold Coast,
Adelaide, Brisbane, and Perth.
price includes delivery by local mechanic, set
up, with 12 months on site warranty parts and
labour. Freight could apply from
Melbourne to your area. ALL OTHER AREAS NOT LISTED ABOVE GET A
$110.00 DISCOUNT TOWARDS THE FREIGHT.
IN ALL CASES THE MACHINE IS CHECKED AND
STITCHED OFF.
Above Typical GC6920-MD3 Fully Automatic.
Automatic Thread Trim, With Full Featured Control Panel and
Display.
Automatic Foot Lift.
Micro Lube Sealed Oil Sump.
Electronic Feed System.
Set Stitch Length From Control Panel.
Led light, dimmable to suit operator needs.
Builtin Bobbin Winder.
Thread Nipper for Clean Stitch at Start.
NEW Simple to use control
panel,
touch
pad control.
Set: type of
stitch, stitch length (No stitch Dial), with
"Electronic Feed System"
Set: Time saving,
easy on the operator operations.
Program: Change bobbin warning, and
garment count.
Copy: Setting to
USB device.
Enter: Advanced
mode to configure for your type of work.
Program:
Impressive stitches for top stitch using stitch
length, and reverse stitch,
with "Electronic Feed System"
Adjustable 2 X led
Lights.
Thread
Nipper.
Back Tack Switch.
5mm
Stitch Length Set From Touch Pad
Built in
bobbin winder.
Built-in Auto Foot Lift.
Adjust
brightness to suit.
No more birds
nest at the start.
Easy back
tack within reach.
Stitch
stays where you set it.
On top of
the machine where it can
be seen. With handy knife to trim
bobbin thread.
Foot can be set to lift on heel back,
and auto on finish
Model
Work Type
Stitch
Stitch
Length
Bobbin
Feeding
RPM
Foot
Lift
Work
Area
Bed Dimensions
Needle
Built
in lightMade In
GC6920-MD3
Light-Medium
Lockstitch
0-5 mm
Standard.
Electronic
5000
6/13 mm Knee Press
295 mm X 140mm
520X180cm
16X231 DBX1
2XLed.
China
USB Port Program
Automatic
Model
Stable Stitch
at Cross Seam
Electronic Feed Control
Touch Pad
Panel
Needle Breakage Prevention
No Birds Nest
Operator Created Stitches
Lock Your
Settings
Exclusive Features
Automatic
Model
Thread Trim
Back Tack
1 to 4 Start/Finish
Slow Start
Set Stitch Length from Touch Pad
Max. Tack
Stitches
Turn on/off
Trim
4 Bar Tack
Reverse
Switch
Change Needle
Stop
up/Down
GC6920-MD3
Motor | Type | Output Power | Amps | RPM | Made In |
Typical | Direct Drive Servo, Synchroniser, and top Speed adjustment. |
550 Watts 0.6 HP |
0.3 | Top Speed Adjustable | China |